Unverferth Rolling Harrow II, Operator'S Manual/Parts Catalog

Page: 7 / 66

-7-
SAFETY
DURING OPERATION
Do not allow anyone to ride on the equip-
ment. Make sure everyone is clear before
operating machine or tractor.
Regulate speed to field conditions. Maintain
complete control at all times.
Do not attempt to move any objects away
from moving parts.
Keep hands, feet, clothing, and objects away
from moving parts.
Do not grease or oil equipment when in op-
eration.
Use extreme care when operating close to
ditches, fences, or on hillsides.
Do not leave tractor or implement unattended
with engine running.
Never attempt to operate implement unless
you are in the driver's seat.
BEFORE TRANSPORTING
Secure the drawbar pin with safety lock be-
fore transporting.
Secure safety chain to implement and to draw-
bar before transporting.
Install transport locks before transporting. Make
sure that all safety decals, SMV emblem, and
reflectors are clean and in place on machine.
Latch tractor brake pedals together before
transporting.
Comply with state and local laws governing
highway safety when moving machinery.
Use accessory lighting or warning lights when
transporting at night to adequately warn op-
erators of other vehicles.
DURING TRANSPORT
Use good judgement when transporting imple-
ments on a highway. Maintain complete con-
trol at all times. Regulate speed to road
conditions. Maximum speed of a vehicle with
an implement should never exceed 20 m.p.h.,
and then only under ideal road and traffic
conditions.
Drive at speeds slow enough to insure your
safety as well as others.
Regulate speed during off highway travel. Do
not travel faster than 10 m.p.h.
Slow down before making sharp turns or us-
ing the brakes. Drive slowly over rough ground,
hillsides, and around curves to avoid tipping.
Due to the width of the implement, use extra
caution on highways, farm lanes, and when
approaching gates.
COMPLY WITH ALL SAFETY WARNINGS
AND CAUTIONS IN THIS MANUAL, IN TRAC-
TOR, AND IN PRIMARY TILLAGE TOOL
OPERATOR'S MANUALS.