9
NOTE!
The default password is used for your first login. To ensure account security, please change the password after
your first login. You are recommended to set a strong password (no less than eight characters).
The device protects itself from illegal access by limiting the number of failed login attempts. If login fails six times
consecutively, the device locks automatically for ten minutes.
3.2
Network Configuration
3.2.1
Ethernet
Modify communication settings such as the IP address for the device so that it can communicate with other
devices.
NOTE!
After you have changed the IP address, you need to use the new IP address to log in.
(1)
Choose
Setup
>
Network
>
Network
to go to the
Ethernet
interface.
(2)
Set
Obtain IP Address
as shown in
1
in the figure above.
Set network parameters by referring to the table below.
