10
NOTE!
The operating voltage and current for alarm output devices should not
exceed 12 VDC and 0.7 A.
Mounting a 16-channel DVS
Mount in a Protective Box
NOTE!
Use a 19-inch cabinet firm enough to hold the device. This section takes
a standard 19-inch cabinet as an example.
The device can be mounted without the use of any tray or slide rails. The
mounting ears alone can bear the total weight.
Preparation
Check that the cabinet is stabilized and grounded properly.
Check that no object is left inside the cabinet or placed nearby to
hinder the mount.
Determine an appropriate mounting position inside the cabinet.
Install mounting ears
In the following figure the mounting ears are attached at the same side
as the front panel. They can also be attached at the same side as the
back panel.
1.
Attach a mounting ear to the device and secure it with two M4*8
screws.
2.
Install the other one in the same way.
