Unova Intermec TRAKKER Antares 2455, Getting Started Manual

Page: 15 / 28

nugget font
Installing the Terminal and Connecting Devices
15
To install the keyboard
1. If you are using the T2455 keyboard, install the keyboard overlay that shipped with
the terminal. For help, see the TRAKKER Antares 2455 Keyboard Installation
Guide (Part No. 067363).
2. If you are installing the keyboard separate from the T2455, determine the mounting
locations for the terminal and the keyboard.
3. If you are installing a PC-AT keyboard (non-T2455 keyboard), you need to
determine how to mount the keyboard to the mounting surface on the vehicle.
4. Install the keyboard on the T2455 or on the vehicle. For help, see the TRAKKER
Antares 2455 Keyboard Installation Guide.
5. Unplug the rubber plug from the Keyboard port on the terminal.
6. If you are using a PC-AT keyboard, connect the Intermec keyboard adapter cable to
the keyboard cable.
7. Insert the keyboard cable connector straight into the Keyboard port on the terminal.
The icon on the keyboard cable connector should align with the same icon on the
back of the T2455.
2455G.011
Keyboard
cable connector
Keyboard
Note: The Keyboard port plug is not shown for clarity.
8. Use a straight-slot screwdriver to tighten the two screws in the keyboard cable
connector and secure the cable to the T2455.
9. Tuck any excess cable into the back of the keyboard or make sure the cable will not
be pinched or rubbed by any moving parts on the vehicle.