30 von 96
Stand 25.5.2021
DE
EN
FR
NL
IT
ES
PL
TROUBLESHOOTING
1. Important: If ice cube production is interrupted, for
instance by a power failure, disconnection from power
supply or inadvertent pressing of the „ON/OFF“ button,
small pieces of ice might form on the ice cube shovel
(fig. 1). Pull the plug from the power socket, push the
shovel towards the back of the appliance and remove
the ice.
2. If the shovel does not transfer the ice cubes into the
basket, the water level might be too low. If there is sufficient water in the
appliance, carefully push the shovel towards the back, using your fingers,
and then restart the appliance.
Problem
Cause
Remedy
Loud noise from com-
pressor.
Voltage too low.
Switch off the appliance
and check whether it is
correctly connected to a
220–240 V~ power so-
cket.
„Add Water“ indicator
lit.
Insufficient water in wa
-
ter tank.
Add water to the "Max."
mark.
Air in pump.
Press the "ON/ OFF" but-
ton to start the ice cube
maker.
None of the indicators
is lit when the ice cube
maker is switched on.
The appliance is not
connected to the power
supply.
Check whether the plug
is correctly inserted in
the power socket.
An appliance compo-
nent is defective.
Contact our customer
service department.
