uno.
Uno International Ltd.
Stepper Control Board Manual
15/21
8. Daisy chaining pumps
You can daisy chain up to eight motors of various types and control them all from a single PC. Each pump must
have its own control board and a power supply. You can daisy chain the power supplies for all boards in an
assembly. You can run any number of different motor types sequentially. You can not run the motors
simultaneously.
8.1 Daisy chaining cable
In order to enable the software to talk to all pumps, you need a Daisy Chain Cable to run from each pump to the
next.
A daisy chain cable for connecting two pumps consists of 2 female Molex connectors and a cable and can look
like this:
A daisy chain cable for connecting many motors could look like this:
These cables are available from Uno International Ltd.
Part No. 6000.553
Uno Part No. 6000.554
