P a g e
| 12
Hot Water Boiler with Steel Body, Automatic Fuel Feed Operation and Maintenance Manual
BOILER FEATURES
ÜKY/Y Boiler Features
1. Fire pot
6. Flue pipes
11. Chimney hood
16. Return from radiators
2. Auger
7. Fan clack
12. Motor protection
17. Safety outlet
3. Gear box
8. Hopper
13. Upper cover
18. Safety inlet
4. Control box
9. Hopper sieve
14. Lower cover
19. Fill/discharge
5. Flue
10. Hopper cover
15. Outlet to radiators
20. Fan
1.
Fire pot: Consists of two nested containers. The fuel is driven by the spiral from the incoming
chamber, blowing the fan out. The fan air and fuel meet above the ladle.
2.
Auger: It is a spiral twist, which is the shaft in the middle of the hopper that supplies the fuel into
the hearth. The fuel supply standby settings are settings for the helix operation.
3.
Gear box: Used with motor. It is used to increase the power by decreasing the speed of the
engine. Geared motor gives the movement of the auger.
4.
Control box: It is the electronic box that activates the boiler. It controls when the gear unit, the
motor, the pump will stop and when. The temperature values that you read while the controller is
active.
5.
Flue: It is the boiler section that throws out the toxic gases inside the boiler with the chimney
mechanism to be connected. The biggest factor in the good burning of the boiler
6.
Flue pipes: It is the way the burning inside the boiler is sent to the chimney. Fumes from the flame
reach the chimney through the pipes.
7.
Fan clack: When the fan is stopped when there is no burning, it is the mechanism used to prevent
air from entering. The metal cover inside the flap prevents the air intake from falling
automatically when the fan air does not pull.
8.
Hopper: This is where the fuel is stored. The capacity to be taken according to the fuel size varies.
