P a g e
| 2
Manuel Fuel Feeding, ÜKY/W Hot Water Boiler User Manual
INTRODUCTION
We would like to thank you for your choice of UNMAK manual feeding solid fuel
boilers. Please read the user manual carefully before installing and operating your
product and keep the user manual for the duration of the product use. Do not
touch or mix any part of the product except where permitted in the user manual.
The installation, maintenance and service of the boiler requires a specialist
technical team.
These operating instructions and regulations should be considered for the installation of the boiler,
selection of the location for installation, installation of the boiler water installation and the design of
the chimney.
UNMAK boilers are high-efficiency, steel-based hot water boilers designed to burn only solid fuel.
These boilers are only used for heating of central heating, not suitable for direct use of water. However,
it can produce hot water with the help of a water heater or heat exchanger. The energy required for
domestic water will be taken from the boiler’s energy.
UNMAK boilers convert the chemical energy of the fuel into heat energy by burning and load it onto
the water which is the heating fluid. Excessive fuel overcharging to the combustion chamber will cause
energy loss and will take longer to burn.
User manual should be read carefully and stored with the associated warranty certificate
for the life of the boiler.
SHIPPING AND TRANSPORTATION
UNMAK solid fuel boilers are manufactured from thick sheet. Boilers are sent in a complete package.
1. Boiler Group: It is shipped with boiler insulation and outer jacket covered.
2. Accessories: Draft regulator and its chain situated in ash box.
Safe transport of the product
Solid fuel boilers are heavy products, so care should be taken when transporting the boiler to the place
where it will be installed. The equipment used to lift and transport the product must therefore be of
sufficient capacity.
