P a g e
| 3
ÜKY/DUO Boiler User Manual
TRANSPORT AND SHIPPING
ÜNMAK ÜKY/DUO series boilers are manufactured from welded thick sheet metal.
1.
Boiler Group: Boiler insulation and outer jacket are shipped dressed.
2.
Accessories: Control panel, pump (pump is given for capacities below 60.000 kcal/h power),
warranty manual and boiler accessories are included in the boiler package.
Safe transportation of the product
Solid fuel boilers are heavy products, so care should be taken when moving the boiler to the place
where it will be installed. Therefore, the equipment to be used to lift and transport the product
should be at a sufficient capacity.
In order not to damage the boiler outer
sheets
and
the
boiler
during
transportation;
In small boilers, while carrying the
transportation rope through the forklift
stands on the chassis and carrying the
boiler with the help of a crane or hoist,
care should be taken not to damage the
painted thin sheets of the boiler and the reducer-fan group under the bunker.
In large boilers, it is also suitable to be lifted from the forklift stands or the transport ring on the
boiler. If the connecting ropes are to be passed under the boiler while lifting with a crane, preventive
measures should be taken to crush the upper tar of the boiler by the ropes. The boiler standing on
the ground must be lifted directly without a puller. When carrying in cold weather, the boiler should
not be lifted suddenly in case the rope freezes from the cold.
Care should be taken not to damage the gearbox and fan under the bunker.
When removing the packaging around the boiler, hard and cutting objects should not
be used in order to prevent damage to the painted boiler plates underneath the
packaging.
