10
M-T-O switch of the hearing aid is in T or MT mode. Also check the status of your hearing
aid batteries.
Bad sound quality? Adjust the loop current, bass and treble controls. Bass and treble
adjustment should normally not be needed.
Service
Should the system not work after having made the product test as described above, please
contact the local distributor of the product for further instructions. If the product is sent to
Bo Edin AB, please enclose a filled Service Form, www.Univox.eu, Support.
Environment
Please follow existing disposal regulations in your country. If you respect these instructions
you ensure human health and environmental protection.
Technical data
Correctly installed Univox® CLS-1 fulfils the demands of the international standard IEC
60118-4:2006.
For additional information, please refer to product data sheet/brochure and CE certificate
which can be downloaded from www.Univox.eu. If other technical documents are required
they can be ordered from [email protected].
