UNIVIEW DC4300 Series, Quick Manual

Page: 30 / 33

23
Verifying the Installation
WARNING!
To avoid bodily injury and device damage caused by incorrect cable
connection, verify the installation before you connect the device to the
power source.
To verify the installation, check the following:

The device is installed stably with all screws fixed tightly.

No objects are placed on the top of the device chassis.

The device is grounded, and all cables are connected correctly.

The power voltage is stable. The selected power source meets the
requirements as described in Technical Specifications .
Starting Up the Device
After the cables are connected, connect the device with the power
source, and start up the device. Examine the device status according to
Table 1-1 .
3
Logging In to and Out of the Device
You can manage and maintain the device through the Web interface.
Before you log into the device, verify that:

The device is operating correctly.

The network connection between the PC and the device is normal.

The PC is installed with Microsoft Internet Explorer 7.0 or higher.

The browser on the PC is not configured with the proxy server.
The default IP address of the device is 192.168.0.14, the subnet mask is
255.255.255.0, and the default gateway is 192.168.0.1.