UNIVIEW DC4300 Series, Quick Manual

Page: 28 / 33

21
Connecting Network Cables
As shown in Figure 2-4 , connect one end of the network cable to the
Ethernet copper port of the device, and connect the other end to the IP
network.
Connecting the AC Power Cord
WARNING!
Before you connect the power cord, make sure the power switch of your
device is turned off to avoid possible bodily injury and device damage.
1. Take out the cable-retention clip from the package, and install it to
your device, as shown in Figure 2-7 .
Figure 2-7 Installing the cable-retention clip
1:
Cable-retention
clip.
2. Connect the AC power cord and turn the cable-retention clip to
hold the power cord tight, as shown in Figure 2-8 .
1