4
Option 3 (for more than 2 disks)
You will open the front panel and install hard disks on mounting brackets.
1.
Secure the disk to a pair of
mounting brackets (L means
left and R means right).
2.
Press the latches on both sides (1) and
then detach the front panel (2).
3.
Align the disk at the slot and
then insert the disk gently.
4.
Push the disk slowly until it clicks.
Repeat the steps to install all disks and
then close the front panel.
Ports, Interfaces and LEDs
The ports, interfaces, connectors, power on/off switch and LED indicators may vary
with device model. See the following two examples.
用螺钉将硬盘固定在拉手条上，拉
手条注意区分左右
用双手分别按住前面板两侧卡扣，
按方向②拆卸前面板
对准硬盘槽位，轻缓、平稳地插入
硬盘
用拇指推进硬盘，可听到扣上的声音，
完成该硬盘安装
