3
Disk Installation
Choose an option. Use a 1# or 2# screwdriver as needed. All photos are only for
illustration.
Option 1 (for 1 or 2 disks)
1.
Remove the cover, connect data
and power cables to disk(s), and
then secure disk(s) with screws.
2.
Connect data and power cables to the
motherboard and then install the
cover.
Option 2 (for more than 2 disks)
You will open the cover and install hard disks on mounting plate(s).
1.
Remove the cover and then
secure disks
to mounting
plate(s) with screws.
2.
Connect data and power cables to
disks. Secure mounting plate(s) to the
device, and then install the cover.
