background image

UNIVEX VS2000 HIGH VOLUME VEGETABLE SLICER/SHREDDER

INSTRUCTION MANUAL

Welcome to Univex

Thank you for purchasing this Univex Product.

Your new PM91 Prep-Mate has been designed with advanced performance and safety features that make it an

excellent addition to your food preparation equipment. Like all Univex mixers, slicers, meat grinders and
accessories, this power unit is engineered to provide years of reliable service.

If you have any questions concerning the operation of this unit, or if we can be of further assistance, please

call our Customer Service Department for the location of your nearest service representative.

Univex Customer Service:
USA & Canada 800-256-6358
International 603-893-6191

Or visit us on-line at www.univexcorp.com under service agents.

The UNIVEX VS2000 HIGH VOLUME VEGETABLE SLICER/SHREDDER is a 1 HP portable

electric unit consisting of a poly “V” belt assembly with a No. 12 drive hub operating at 7000 rpm. It is
designed to support and power the UNIVEX VS9 vegetable slicer, and the VS9H shredder and grater
food processing attachments.

INSPECTION

The VS2000 drive assembly has been inspected and tested at the factory, however the user should

perform an external inspection and electrical check prior to use. The electrical data listed on the
nameplate of the drive unit should be the same as the user’s electrical supply. Any damage should be
reported to the carrier immediately and any shortage or deviation of parts should be reported to Univex
Corporation.

Page 2

Summary of Contents for VS2000

















Reviews: