Gas burning pizza brickoven
R-001 100518
Page 6 of 33
2.
GENERAL INFORMATION
This user manual is part of the standard-production equipment and represents a
fundamental support for its startup and appropriate use.
Read it carefully and thoroughly before installing and using the equipment.
In case of reselling, the manual shall be included as part of the equipment.
Partial reproduction of this document without the written authorization by
Univex
is
forbidden.
2.1
Definitions and icons
Here below we illustrate a series of definitions, specific terminology and icons that have
been used in this manual.
2.1.1 Definitions
Icon
Description
Lifting and Handling Equipment Operator:
the operator who has been trained
to use equipments for lifting and handling materials and machines. Handling
operations should be carried out according to the instructions described in this
manual and in compliance with the applicable laws in the country where the
equipment is used.
First Level Operator:
the operator, with no specific skills, who is able to use
the equipment in normal working condition and for simple maintenance
interventions.
Mechanical Maintenance Technician:
the qualified technician who has been
trained to operate the equipment in normal working condition and to operate on
mechanical - hydraulic - pneumatic gears in order to make adjustments,
maintenance interventions, installations or repairs according to the instructions
outlined in this manual.
Electrical Maintenance Technician:
the qualified technician who has been
trained to carry out interventions on live electrical racks, branching boxes and
electrical fittings, as well as to operate the equipment under normal working
conditions and to make interventions on electrical systems for adjusting,
maintenance, installation and repair operations.
Manufacturer's Technician:
the qualified technician who has been designated
by the manufacturer to carry out complex operations in specific situations or, in
any case, on the basis of what has been agreed upon with the user. Depending
on each case, the personnel is requested to have mechanical and/or electrical
and/or electronic and/or IT skills.
Equipotential bonding
Ground protection
