universalblue UINDU6500-18, Instruction Manual

Page: 40 / 44

40
the requirements)
• The isolating switch will be easily accessible to the customer with the hob installed
• You consult local building authorities and by-laws if in doubt regarding installation
• You use heat-resistant and easy-to-clean finishes (such as ceramic tiles) for the wall surfaces
surrounding the hob.
When you have installed the hob, make sure that
• The power supply cable is not accessible through cupboard doors or drawers
• There is adequate flow of fresh air from outside the cabinetry to the base of the hob
• If the hob is installed above a drawer or cupboard space, a thermal protection barrier is installed
below the base of the hob
• The isolating switch is easily accessible by the customer
BEFORE LOCATING THE FIXING BRACKETS
The unit should be placed on a stable, smooth surface (use the packaging). Do not apply force
onto the controls protruding from the hob.
ADJUSTING THE BRACKET POSITION
Fix the hob on the work surface by screw 2 brackets on the bottom of hob(see picture) after insta -
llation.
Adjust the bracket position to suit for different table top thickness.
A B C D
screw bracket screw hole base