universalblue UBF2205-20, Instruction Manual

Page: 39 / 44

39
All users should become familiar with the instructions. Knowing
what can go wrong can be of help to prevent further problems are
caused.
Problem Solution
The
appliance
does not
work
Make sure that the device is correctly plugged in, that the fuse is not
blown or that a power failure has not occurred.
The room temperature is too low. Try adjusting the camera
temperature to a cooler level to solve this problem.
The device
does not
work properly
It is normal for the freezer not to operate during the automatic
defrost cycle or for a short period of time after the appliance is
turned on to protect the compressor.
The
appliance is
cooling more
than
expected
The temperature knob it may be at the maximum position.
If you have placed food that contains a lot of moisture under the
cooling vents, remove the food from the area.
The
appliance is
not cooling
as expected
The food may be too close which will block the air circulation. You
may have placed hot foods or too many foods inside the refrigerator.
The door may not be closed correctly. The rubber on the door may be
damaged. The refrigerator may not be ventilated. There may not be
enough free space between the top and side spaces of the
refrigerator and other surfaces.
The temperature regulator may not be positioned correctly.
Odours come
out of the
device
The interior may need to be cleaned.
Any food, container or wrapping is in poor condition and causes
odors.
There is
thawing
water
scattered
inside the
appliance
and on the
floor
Make sure that the tube and drain hose are not blocked. Make sure
that the drainage compartment is correctly positioned.