6
Alternate Channel Group Selection:
The Wireless Keypad Unit can be set to one of three
alternate channel groups, to overcome range-reducing interference from conflicting radio
transmitters.
Change the channel setting on the Master Keypad Unit only. Once the channel
group is changed on the 1
st
Keypad Unit in the system, re-teach to other keypads and
receivers in the system.
-
To alternate operating channel groups, on the Keypad Unit, enter in the Master Pin Number,
followed by
55
.
-
Immediately enter
1, 2, or 3,
to set the channel group.
The Keypad Unit will give a single beep as the new channel group is accepted. The default setting is
channel group 1.
13: Operating Mode:
Party Mode:
To keep your gate open during a party or other activity, so the gate won’t have to
open with the arrival of each guest, you can set the Wireless Keypad Unit to keep the gate open,
until it is cycled closed.
To use this setting, the Receiver Unit MUST be connected to an
external power supply.
-
To enter Party Mode, on the Primary Keypad Unit, enter in the Master Pin Number, followed by
54
.
-
To close the gate and exit Party Mode, cycle the gate by entering a Pin Number.
14: Batteries:
The Wireless Keypad Unit uses four ‘AA’ batteries. The average life of the Wireless Keypad Unit’s
batteries is a year with all functions enabled.
Lithium batteries are recommended for longer life
and
for use in colder climates.
Universal Wireless Solutions
Designed and Manufactured In the USA.
A manufacturer’s full One Year Warranty covers this product
.
See www.WirelessGateAccess.com for technical information and questions
FCC STATEMENT
This device complies with FCC part 15 rules. It may not cause harmful interference with other devices, and must accept interference
from other devices.
NOTE:
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Changes or
modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Warranty
: This product is warranted to be free of defects for the period of
One Year
from the date of purchase.
The warranty covers parts, labor,
and return shipping to you, but not all accessories
. IEI will repair or replace any defective product at our discretion. Warranty does not cover
misuse or damage other than due to normal operating conditions. If you need to send the system to IEI for repair, contact IEI for a
Return
Authorization number via email: [email protected].
Packages without a Return Authorization number will be rejected.
