Parts Breakdown for UT1550C
Replacement Parts for UT1550C
UT1550C
UT1550C
1-1/2 STRAIGHT IMPACT WRENCH
USE ONLY IMPACT SOCKETS & ACCESSORIES
Sockets and accessories used shall be of the impact socket type. Always check sockets,
retainers and drives regularly for wear or damage and replace whenever necessary
Limited Warranty
Universal Tool warrants its tools to be free from defects in material and workmanship for one year from the date of
purchase. This warranty does not apply to tools which have been abused, misused, modified or repaired by
someone other than Universal Tool or its authorized service centers. If a Universal Tool proves defective in
material of workmanship within one year after purchase, return it to any authorized service center or to Universal
Tool, freight prepaid. Please enclose your name, address and adequate proof of purchase date with a brief
description of the defect. Universal Tool will, at its option, repair or replace defective tools, free of charge. Repairs
or replacements are warranted as described above for the remainder of the warranty period. Universal Tool's sole
liability and your exclusive remedy under this warranty is limited to repair or replacement of the defective tool.
There are no other warranties expressed or implied and Universal Tool shall not be liable for incidental, consequential
or special damages, or any other damages, costs or expense of repair or replacement as described above.
1-1/2 STRAIGHT IMPACT WRENCH
Specifications
:
Shank ................................................................................................................................1-1/2”
Speed.............................................................................................................................3,750 RPM
Working Torque....................................................................................................725-2,500 ft. lbs.
Max. Torque ...............................................................................................................3,000 ft. lbs.
Weight..................................................................................................................................33 lbs.
Overall length...................................................................................................................14.50”
Average air consumption.............................................................................................17.5 CFM
Recommended hose size...................................................................................................3/4" I.D.
Air inlet.............................................................................................................................1/2" NPT
Maximum operating pressure ...........................................................................................90 psi
REF#
PART#
DESCRIPTION
1.2
2950-726
1-1/2 SQ. DRIVE ANVIL
6
2950-541
HAMMER CASE BUSHING
7
2950-A727
HAMMER CASE ASSEMBLY (INCL. #6)
8
2945-638
HAMMER CASE CAP SCREW
9
NL10
3/8 NORD LOCK WASHER
10
845-364
BRACKET
11
834-48
ASSIST HANDLE
12
2950-98
CYLINDER DOWEL PIN
13
850-283
HANDLE GASKET
14
834-24
BALL BEARING
15
2950-12
REAR END PLATE
16
2950-3
CYLINDER
17
2950-42
VANE
18
2950-53
ROTOR
19
2950-11
FRONT END PLATE
20
R44H-210A
AIRPORT GASKET
21
2940-200
GASKET RETAINER
22
2934-301
NAMEPLATE
23
N/A
NAMEPLATE RIVET
24
2950-A40
MOTOR HOUSING (INCL. #20, 21, 38)
25
2950-724
HAMMER
26.2
2950-A92
INSIDE TRIGGER HANDLE (INCL. #29.2, 30.2, 31, 33, 34, 35, 36, 37, 42, 43, 47)
27
NL8
5/16 NORD LOCK WASHER
28
834-638
HANDLE CAP SCREW
29.2
834-93
INSIDE TRIGGER
30.2
534-265
TRIGGER PIN
31
2950-302
THROTTLE VALVE PLUNGER
32
2934-159
O RING
33
2934-A50
THROTTLE VALVE (INCL. #32)
34
834-51
THROTTLE VALVE SPRING
35
834-61
AIR STRAINER
36
845-565
STRAIGHT INLET
37
130SR-188
GREASE FITTING
38
2934-330S
REVERSE VALVE BUSHING
39
4U-664
REVERSE LOCK SPRING
40
4U-663B
REVERSE LOCK PLUNGER
41
MR-207
MOTOR CLAMP WASHER
42
R2-75
OILER FELT
43
R2-71
OILER ADJUSTING SCREW
44
2934-A329
REVERSE VALVE (INCL. #45)
45
85H-167
O RING
46
2934-658A
REVERSE LEVER
47
R00BR-210
REVERSE VALVE SEAL
48
TA-22
BALL BEARING
49
845-36
HAMMER CASE GASKET
50
2950-A703
HAMMER FRAME (INCL. #51)
51
2950-704
HAMMER PIN
52
R43F-104
BACKHEAD CAP SCREW
53
2934-23A
EXHAUST DEFLECTOR
54
2940P-311
EXHAUST SILENCER
55
2934-124
EXHAUST BAFFLE
56
2934-223
EXHAUST GASKET
