![background image](http://html1.mh-extra.com/html/universal-remote-control/trf-zw2/trf-zw2_owners-manual_1058644023.webp)
Advanced Z-Wave Functions
These Advanced Z-Wave Functions are usually needed only for
specific (and rare) technical situations, or for professional installers
creating very large systems, or for developers creating new hardware
or software.
You may need to access these advanced functions if there’s a problem
with your system and you need to reset the Z-Wave network, if you
want to upgrade to a different model of URC Controller, to enable
another controller to operate your TRF-ZW2, or for other technical
situations as described below.
To access Advanced Z-Wave Functions select
Settings
and then
Z-Wave Settings.
Select the
Advanced
tab (Figure 3-1).
From there you’ll be able to access these Advanced Z-Wave options:
Reset Z-Wave network
Will clear all the user configuration data and assign a new
Z-Wave HouseID.
Copy Z-Wave network from a primary controller
Will allow the unit to copy all Z-Wave related information from
a Primary Z-Wave Controller and is used with Replication.
Controller shift
Tells URC to transfer the role of primary controller to another
Z-Wave controller. The other Z-Wave controller will become the
‘Master controller’, and TRF-ZW2 will be a secondary controller.
This means the other Z-Wave controller will then be responsible
for healing the networking and being the SIS/SUC (a technical
Z-Wave term). Normally, by default, TRF-ZW2 is the master
controller and is SIS/SUC.
A
A
B
B
C
C
Figure 3-1:
Advanced Tab
Summary of Contents for TRF-ZW2
Page 1: ...i TRF ZW2 Z Wave Gateway Owner s Manual ...
Page 17: ...14 Notes ...
Page 19: ...TRF ZW2 Controller Z Wave Overview Guide ...
Page 26: ......