Universal Remote Contorl ccGEN2 RM-1, Owner'S Manual

Page: 5 / 20

Page 2
RM-1 O
WNER
’
S
M
ANUAL
Displaying the Settings Screen
You can adjust settings of the RM-1 whenever
you like by pressing and holding the MAIN + ENT
button for three seconds. When you do the screen
will change to the Settings Menu. If you do not press
any button on the Settings screen, the RM-1 will beep
signifying a time-out after 30 seconds and
return to the previous setting or main screen.
There are two pages of Settings screens. To access
the other page, press either of the page buttons.
To select a setting, press the corresponding button.
To go back a step or to get out of the settings screen,
press either the MAIN button or the EXIT button on
the RM-1.
Color Screen
Color screen settings give two configurable options.
1. Brightness: Adjust the screen brightness by
pressing the screen buttons on the left and right
side of the slider bar. Once the brightness is
adjusted, press the Save button. Pressing the
Cancel button will revert to the remote’s last
saved brightness setting.
Note: The higher the brightness, the faster the
batteries will deplete.
2. Automatic Turn Off: Adjust the duration the
OLED screen will stay illuminated after a button
is pressed. Pressing the left and right screen
buttons, next to the slider bar, will change how
long the OLED screen will stay on. Pressing the
Less side will decrease the time in steps down to