www.urcsupport.com
21
NOTE:
You can program up to 15 key presses into one
macro.
6.
To add another macro, repeat steps 1 through
5, substituting the new key sequence to be
added in step 4.
NOTE:
Programming more than five macros on the
same macro key overwrites previous settings.
Clearing a Macro Key
3.
Press the macro key you want to clear once.
This macro key is now clear and ready for
reprogramming (see “Programming a Macro Key” on
page 20). If desired, repeat these to clear another Tune-
In key.
USING THE MASTER POWER KEY
The Potenza ST Remote Control has a unique feature
that allows you to sequentially turn up to five of your
home entertainment devices on or off with a single key
press.
NOTE:
MASTER POWER (POWER)
only works in the
STB
mode. If it is not programmed, only the
set-top box will turn on or off. In any other
mode, pressing
MASTER POWER (POWER)
once will turn the selected device on or off.
Programming the Master Power Key
5.
Press and hold
SETUP
until it blinks twice.
1.
On the remote control, press and hold
SETUP
until it blinks twice.
2.
Enter
9 9 5
. The
SETUP
key blinks twice.
4.
Press and hold
SETUP
until the active mode
key blinks twice.
1.
On the remote control, press and hold
SETUP
until the last-selected device key blinks twice.
Nebula Potenza ST.fm Page 21 Monday, October 15, 2007 4:55 PM
