30
RE-ASSIGNING DEVICE KEYS
The Atlas DVR/PVR 5-Device Universal Remote Control
can be set up to control a second device. For example,
to have the unit control a TV, a Cable Converter, and
two
DVD Players, you will need to re-assign the unused
AUX
key to operate the second DVD Player as follows:
NOTE:
AUX
is preset at the factory to control an RCA VCR.
Performing the below steps will overwrite those settings.
1.
On the remote control, press
AUX
once; it will
blink once. Then press and hold
SETUP
until
the
AUX
key blinks twice, then release
SETUP
.
2.
Enter
9
-
9
-
2
. The
AUX
key will blink twice.
3.
Press
DVD
once, then press
AUX
once. The
AUX
key will blink twice.
4.
The
AUX
key is now ready to be programmed
for your second DVD player. See
Programming
Device Control
on page 10.
To re-assign other device keys, repeat steps 1 to 4 and
substitute the key sequence using the following chart:
NOTE: Only one device can be assigned to an unused device key
at a time.
To Re-Assign
Perform Key Sequence
AUX
as 2nd
AUD
key:
AUX
-
SETUP
-
9
-
9
-
2
-
AUD
-
AUX
AUX
as 2nd
TV
key:
AUX
-
SETUP
-
9
-
9
-
2
-
TV
-
AUX
AUX
as 2nd
CBL
key:
AUX
-
SETUP
-
9
-
9
-
2
-
CBL
-
AUX
AUX
back to
AUX
:
AUX
-
SETUP
-
9
-
9
-
2
-
AUX
-
AUX
To re-assign another unused device key, substitute it for
the
AUX
key above and then perform the sequence. For
example, to re-assign an unused
AUD
key as a second
DVD
key, perform
AUD
-
SETUP
-
9
-
9
-
2
-
DVD
-
AUD
.
When a re-assignment is done, the selected device key
(e.g.,
AUD
) will blink twice to confirm your choice.At that
time, you will need to program device control (see
Programming Device Control
on page 10).
Atlas DVR/PVR Manual 3/20/03 5:00 PM Page 30
