29
USING THE MASTER POWER KEY
The Atlas DVR/PVR 5-Device Universal Remote Control
has a unique feature that allows you to sequentially turn
on or off up to five of your home entertainment devices
with a single key press.
To Program The Master Power Key:
1.
On the remote control, press and hold
SETUP
until the last-selected device key blinks twice,
then release
SETUP
.
2.
Enter
9
-
9
-
5
. The last-selected device key
will blink twice. Then press
PWR
once.
3.
For the first device you want in the
power on
sequence, press a device key (e.g.,
CBL
) once .
4.
Repeat step 3 up to four more times to add the
second,third,fourth,and fifth device,as desired.
5.
To save the settings and exit the program, press
and hold
SETUP
until the last-selected device
key blinks twice, then release
SETUP
.
To Operate The Master Power Key:
NOTE: If
MASTER POWER
is not programmed, pressing it will only
command the last-selected device to power on or off.
1.
After programming, point the remote control
at the devices.
2.
Press and hold
PWR
for at least 2 seconds.
You will see the devices power on or off
according to the programmed sequence.
To Clear The Master Power Key:
1.
Perform steps 1 and 2 in the first section
above,
To Program The Master Power Key
.
2.
To clear the settings and exit the program,
press and hold
SETUP
until the last-selected
device key blinks twice, then release
SETUP
.
Atlas DVR/PVR Manual 3/20/03 5:00 PM Page 29
