Universal Devices ISY-994i Series User Manual Download Page 653

Page: 653 / 692

Page | 630

http://forum.universal-devices.com/viewforum.php?f=25

•

After the firmware is installed your ISY reboots. Please re-launch the Administrative

Console and login:

http://www.universal-devices.com/994i

•

Click on the FILE pull-down menu, then RESTORE ISY and choose your last backup.

23.12

Manually Upgrading Your Firmware

To manually download and install a firmware release, please see the following forum

where both final and beta releases are regularly posted along with specific upgrade
instructions

http://forum.universal-devices.com/forum/15-current-release-betas-and-

bug-reports/

In general, please note the following before performing a firmware update:

•

The downloaded firmware MUST remain zipped. DO NOT unzip the downloaded file.

•

Please ensure you have a good backup before attempting a firmware update.

•

Disable all anti-virus and firewall software before attempting a firmware update.

•

Be sure to run firmware updates from a stable and, if possible, hardwired network

connection. Avoid running firmware upgrades from marginal wifi connections or off-

site locations if possible.

•

Once downloaded, click the HELP pull-down menu, then MANUALLY UPGRADE MY

LIGHTING, and browse to the firmware file you have downloaded.

•

After upgrading your firmware, please close all browser windows and clear your Java

cache as outlined in section

23.6 Clearing Java Cache

23.13

Resetting Your Userid / Password

119

23.13.1

Information common to all models

•

The default (case sensitive) UserID = admin

•

The default (case sensitive) Password = admin

23.13.2

ISY-994i Series

•

Make sure the ISY has been powered on for at least a minute.

119

(Universal Devices)

Summary of Contents for ISY-994i Series





















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ISY-994i Series

Reviews:

Related manuals for ISY-994i Series

Brands by name

Popular brands

Universal Devices ISY-994i Series, User Manual

Search results

Summary of Contents for ISY-994i Series

Reviews:

Related manuals for ISY-994i Series

Brands by name

Popular brands