Univers by FTE U4153, User Manual

Page: 5 / 29

PAG .
English
steP : BAsic confiGurAtion of the
receiver
The receiver includes an installation assistant that will help you
to setup the different parameters.
When the receiver is turned on at first time (using the button
at the rear panel of the receiver), the next menu is shown on
the TV:
In order to move through the different options of this menu,
please use the keysof the remote control. If an “Overloading!
Tuner Power is Off” message is shown on the TV, please
disconnect the “Antenna Input” cable and change the “Tuner
Power” option into “Off”
OSD Language: select the language of the menu and other
information of the receiver. To choose between the different
languages, use keys of the remote control.
First Audio: press the keys of the remote control to choose
the favourite audio language for TV and Radio channels.
Second Audio: press the keys of the remote control to choose
the second audio language. In case of, when selecting a TV
or Radio channel that has not the favourite language, the
second language selected will be automatically listened (if
this action is allowed).
Country: select your country using keys.
Tuner Power: this receiver has the possibility of feeding a 5V
indoor antenna directly through the coaxial cable. If you
have not an indoor antenna and the receiver is connected
to a MATV antenna, you should turn off this option using
keys until [Off] option appears on the TV.
Auto Scan: before making an auto scan be sure that the data
of the Country option (Image 1) is correct, in other case the
search of channels will be made wrongly. Once the Country
option is confirmed, please select the option “Auto Scan”
and press [OK].
Don’t make any action with the receiver until the Auto scan
has finished. For more information about this option, please
read point 4.1 of the complete manual.
Main Menu: if all the previous steps have finished correctly,
you can exit the installation menu, by using “Main Menu”
option and press [OK].
steP : time confiGurAtion
It is recommended to setup the clock before starting to enjoy
the receiver, because correct time maybe is required by some
applications. Please complete following options:
Press the [Menu] key of the remote control for appearing the
main menu. Select the “System Configuration” option and
confirm pressing [OK].
Once in the “System Configuration” option, please select
“Region and Time” option and press [OK]. Image 3 is watched
imAGe 1
Quick instAllAtion Guide.