background image

PAG

.

2

English

rev 1.1

The lightning flash with 
arrowhead symbol, within 
an equilateral triangle, is 
intended to alert the user 
to “dangerous voltage” 
and to prevent from a 
risk of electric shock.

Warning:
To reduce the risk of electric shock, 
don’t open the cabinet. Refer servicing 
to qualified personnel only.

The exclamation point 
within an equilateral 
triangle is intended 
to alert the user to 
important operating and 
maintenance (servicing).

Please read the manual carefully before installing the receiver.
Caution: Never open the device by yourself. Dangerously high voltages are present inside the unit. Refer 
servicing to qualified staff only.
When installing the receiver, always unplug the receiver from the mains voltage.
Unplug the receiver from the mains in case of long periods without operating the receiver (for example, 
during holidays!).
To prevent shock hazard, do not touch the power plug with wet hands.
Always unplug the receiver before cleaning it or working on the connections.
Do not install the receiver close to strong heat sources, and ensure a good aeration if you plan to install 
the receiver in a small cabinet.
Before you start operating the receiver, make sure that the satellite antenna is properly built up, optimally 
connected and aligned.
The correct place to install the receiver is, of course, near your TV set and any other A/V signal sources 
(DVD, VCR, CD, game console, etc.).
Choose a stable support, in which you can easily lay the necessary connecting cables without stumbling-
danger.
The receiver should be installed near an easily accessible outlet.
Do not install the receiver in a place where it can be reached by liquid spills.
Do not put any heavy objects as, for example, a TV-device over the receiver; the receiver could be 
damaged.

DO NOT INSTALL THE RECEIVER: 

 

- On an unstable surface
- Subject to direct sunlight 
- In high humidity environment
- Outside the receiver’s temperature range (+5°...+40°C)

If the receiver is subject to severe temperature changes, it can suffer from water condensation inside. 
Switch off the receiver in these cases for at least 2 hours before resuming operation. 

SAFETY PRECAUTION

Summary of Contents for U4113








































Reviews: