![background image](http://html1.mh-extra.com/html/univers-by-fte/u4109/u4109_user-manual_845773029.webp)
PAG
.
29
English
rev 1.1
SYSTEM SETUP
select the desired mode.
2. Aspect Mode is used to switch the screen aspect ratio mode.
You can select from Auto / 4:3 PS / 4:3 LB / 16:9. Press [
] to select the needed mode.
3. VCR Loopthrought: If there is a VCR connected to the
receiver and, the receiver is connected to the TV, user can
choose what prefer to watch on TV when both equipments are
connected at the same time. If the selection is “VCR master”,
the VCR will be showed even the receiver is on. If the selection
is “STB master”, the receiver will be showed on the TV.
4. Press [Exit] to close the “TV System” menu.
5.3. TIME & TIMER SETTING
When you enter “Time & Timer Setting” a menu with three items
will be opened (OSD 63). Use [
] to select between the
three options and confi rm with [OK].
5.3.1. TIME
When you select “Time” and press [OK] then you will see a
window like the one beside (OSD 64):
1. GMT Usage: This item is used to set the time by using the
time signal from the satellite. Press [
] to change the
setting.
2. The “GMT Offset” item is only available when “GMT Usage”
is set to “On”. Press [
] to set the “GMT Offset” value.
With every time you press the button the time offset will be
increased / decreased by half an hour.
3. “Date” and “Time” items are only available when the “GMT
Usage” is set to “Off”. Press [
] to select one item and
use number buttons to input time and date directly.
NOTE: If the current channel provides the correct time
information, you will see the current time after you entered
“Time” menu. If the channel doesn’t provide time information,
you have to input the date and time information manually. The
most channels support the time signal.
4. Press [Exit] to leave the “Time” menu.
5.3.2. TIMER
Select “Timer” item and press [OK] to enter the “Timer list”
menu (OSD 65).
You can press [
] to select a timer. Then press [Enter] to
open the related timer menu (OSD 66).
The current time will be displayed in the fi rst column. If the
current time is incorrect, please modify it with the [Number]
buttons at the “Time” menu.
1. Timer Number: You can press [
] to set the Timer
OSD 63
OSD 64
OSD 65
OSD 66
Summary of Contents for U4109
Page 1: ...U4109 ...