![background image](http://html1.mh-extra.com/html/univers-by-fte/u4109/u4109_user-manual_845773004.webp)
English
PAG
.
4
rev 1.1
The receiver is programmed with all the channels of Astra (at
position 1 of the DISEqC), Hotbird (at position 2 of the DISEqC),
Hispasat (at position 3 of the DISEqC) and Turksat (at position
4 of the DISEqC). If your installation is different to this case,
please follow installation steps to search the channels.
In order to move through the different options of this menu,
please use the keys [
] of your remote control. If a “Short
circuit on the LNB” message is shown on the TV, please check
the connections before continuing the installation.
Language
: press [
] to select languages. The selection
of languages include: English, German, French, Italian,
Portuguese, Spanish, Turkish, Polish, Hungary and Arabic.
First Audio
: Some channels offer more than one audio language.
This function allows you to set the preferred audio language for
those channels using [
]. If a channel offers the same
audio language as the “First Audio” you set the system will play
this audio language as default. If the channel does not offer
this audio language then the system will compare the offered
languages with the second audio language. The selections of
audio languages include: English, French, German, Russian,
Arabic, Portuguese, Turkish, Spanish, Polish and Italian.
Second Audio
: If the channel has no audio language that
corresponds with “First Audio” but with “Second Audio” the
system will play the second audio language as default. If no
audio language corresponds with the “Second Audio” then the
default language of the current channel will be played instead.
The selections of audio languages include: English, French,
German, Russian, Arabic, Portuguese, Turkish, Spanish, Polish
and Italian.
LNB Power
: Here you can set the power output to the LNB. If
your receiver is connected to the LNB directly then you need to
set the LNB Power to “On”. If your receiver is connected to a
multi switch (SMATV signal distribution system) then it may be
that you don’t need to provide the power to the LNB. But since
this is depending on the kind of installed distribution system we
recommend you to contact your installer or to refer to the user
manual of this system to get the correct information.
Antenna Setup
: You can edit the following items (Image 2):
1. Satellite: Press [
] to switch Satellites or press [OK] to
enter satellite list to select directly.
2. LNB Confi guration: Selecting this option and pressing [OK],
the LNB Confi guration menu will be displayed. In this menu,
next options can be modifi ed (Image 3):
IMAGE 2
QUICK INSTALLATION GUIDE
Summary of Contents for U4109
Page 1: ...U4109 ...