Univega Bicycle, Original User Manual

Page: 83 / 129

14 Original User Manual | Pedelec Impulse 2.0
5.2 Battery information system
There is a display panel on the outer face of the battery
which includes five LEDs and a battery key or push button.
The LEDs light up as soon as you press the battery key
or push button. Information about the charge state and
capacity of the battery is provided based on the number of
LEDs that light up and the way in which they light up.
Battery key Push button
DOWN TUBE BATTERY SEAT TUBE BATTERY
5.2.1 Checking the charge state
a) Down tube battery: Press the battery key briefly, the
LEDs light up and display the current battery charge state.
DISPLAY BATTERY CHARGE STATE
••••• 5 LEDs light up 100–80%
•••• 4 LEDs light up 80–60%
••• 3 LEDs light up 60–40%
••
2 LEDs light up 40–20%
• 1 LED lights up 20–10%
¡
1 LED flashes 10–0%
b) Seat tube battery: Press the push button briefly, the
LEDs light up and display the current battery charge state.
SEAT TUBE BATTERY DISPLAY BATTERY CHARGE STATE
••••• 5 LEDs light up 100–84%
•••• 4 LEDs light up 83–68%
••• 3 LEDs light up 67–51%
•• 2 LEDs light up 50–34%
• 1 LED lights up 33–17%
¡
1 LED flashes 16–0%
5 LEDs flash quickly 0% or overloaded *
1st LED flashes
quickly Charging fault **
* All 5 LEDs flash quickly: The battery is a) empty and is
being switched off, or is b) overloaded.
a) If the battery is overloaded, it will switch back on after
a short idle period and can then be used normally.
b) If the battery is empty, it will work once again briefly
following a short period of rejuvenation and will then
switch back off. It must now be charged.
** The 1st LED flashes quickly: A charging fault is present.
Please take the battery to your specialist cycle shop.
5.2.2 Checking the capacity
a) Down tube battery: If you hold down the battery key for
roughly five seconds, the LEDs show the current battery
capacity.
SEAT TUBE BATTERY DISPLAY CAPACITY
•••• 4 LEDs light up approx. 81–100%
••• 3 LEDs light up approx. 61–80%
••
2 LEDs light up approx. 41–60%
• 1 LED lights up approx. 21–40%
¡
1 LED flashes approx. 0–20%
b) Seat tube battery: If you press the push button for five
seconds, the LEDs show the current capacity of the battery.
SEAT TUBE BATTERY DISPLAY CAPACITY
••••• 5 LEDs light up 100–97%
•••• 4 LEDs light up 96–80%
•••
3 LEDs light up 79–60%
•• 2 LEDs light up 59–40%
• 1 LED lights up 39–20%
¡
1 LED flashes < 20%