manualshive.com logo in svg

UNITY LAUNDRY SYSTEMS UTS40, User Manual

Share
Download
UNITY LAUNDRY SYSTEMS UTS40 User Manual Download Page 20

20

Part. 14000001

 

Rev. 04//2021

 ®/™ ©2021 Unity Laundry Systems. All rights reserved.

INSTALLATION

4.  Attach the external supply hoses to the ports at each of the drilled holes.

5.  Secure with proper clamps.

6.  Make the electrical connection as specified.

NOTE: Do not attempt to make chemical injection supply pump electrical connections to points other than those 

provided specifically for that purpose by the factory.

3.8   REMOVAL OF SHIPPING BRACKETS AND DOOR CABLE - UTS40

WARNING

DO NOT REMOVE THE SHIPPING BRACKETS BEFORE PLACING 

THE WASHER IN ITS FINAL LOCATION. 

NEVER START THE MACHINE UP WITHOUT FIRST REMOVING THE 

SHIPPING BRACKETS. 

NON-COMPLIANCE WITH THIS PRECAUTION MAY CAUSE SERIOUS 

PHYSICAL DAMAGES TO PEOPLE AND IRREPARABLE DAMAGES 

TO THE WASHER. THE WARRANTY DOES NOT COVER THIS 

INCIDENCE.

After positioning, remove the lower front and back panels and remove the four shipping brackets that were used for 

transportation support. Save the shipping brackets. If the washer ever needs to be moved to another location, replace the 

shipping brackets prior to moving the machine.

FRONT SHIPPING BRACKETS

REAR SHIPPING BRACKETS

Summary of Contents for UTS40





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands