UNITY Lasers RAW 1.7, User Manual

Page: 29 / 29

UNITY Lasers s.r.o. Raw series Operational Manual (Revision 2020-7)
29
TECHNICAL INFORMATION - MAINTENANCE
GENERAL CLEANING INSTRUCTIONS - TO BE DONE BY USER
Due to fog residue, smoke, and dust cleaning the external body of the projector should be carried out
periodically to optimize light output. Cleaning frequency depends on the environment in which the fixture
operares (I.e. smoke, fog residue, dust, dew). In heavy club use we recommend cleaning on a monthly basis.
Periodic cleaning will wnsure longevity and crisp output.
• Unplug the product from power.
• Wait until the product is cold.
• Use a soft damp cloth to wipe down the outside projector casing.
• Use compressed air and a brush to wipe down the cooling vents and fan grill(s).
• Clean the glass panel (laser aperture) with glass cleaner and a soft cloth when dirty.
• Gently polish the glass surface until it is free of haze and lint.
• Always be sure to dry all parts completely before plugging the unit back in.
SERVICE
There are no user serviceable parts inside this unit. Do not attempt any repairs yourself; doing so will void
your manufactures warranty. In the unlikely event your unit may require service, please contact us directly
or your local distributor, who will help you with a repair or replacement. We will not accept any liability for
any resulting damages caused by the non-observance of this manual or any unauthorized modofication to
this unit.