UNITY Lasers RAW 1.7, User Manual

Page: 26 / 29

UNITY Lasers s.r.o. Raw series Operational Manual (Revision 2020-7)
26
Front & Rear panel view (Raw 10)
NO.
Name
Function
1. Laser Aperture
Laser output, do not look directly into this aperture.
2.
Aperture masking
plate
Can be moved up and down when two locking bolts are loosened.
3. Laser emission
When this indicator is lit up the laser system is ready to emit the
laser radiation as soon as it receives instructions from control
software.
4. 3-Pin Interlock
Laser output is available only when the interlock is connected.
It could be used to connect a laser emergency switch.
5. Key switch
Turn the key switch ON to allow laser output.
6. Power in & out
AC100-240V power input and output sockets. With output
feature you can connect the device to one another using the
input and output sockets. They must be the same fixtures.DO
NOT mix fixtures.
7. Power ON/OFF
Power on/off
8. Fuse
Current rating 2A, slow acting type.
9. Function knob
For X Y moving, rotation Y, invert & size; R, G, B brightness
adjustment.
10.
DB25 IN & OUT
DB25 interface in and out for ILDA mode
11. Safety eyelet
Use this together with appropriate safety wire to secure the
system against unexpected fall.