Unitronics
1
Uni-COM
®
CB Modules
Installation Guide
UAC-CB-01RS2,
UAC-CB-01RS4,
UAC-CB-01CAN
SCAN
to download
This guide provides basic installation information for Unitronics’ Uni-COM™ CB Modules.
Use them to add communication ports to specific models of the UniStream
®
family of
Programmable Logic Controllers. Compatible models comprise a Uni-COM™ CB COM
Module Jack which provides the connection point for the module.
Refer to the specifications of your UniStream model to check whether it is compatible with
CB modules.
UAC-CB-01RS2 offers one RS232 port, UAC-CB-01RS4 offers one RS485 port, and
UAC-CB-01CAN offers one CANbus port.
Technical specifications and Installation Guides are available in Unitronics Technical Library
at
Before You Begin
Before installing the device, the installer must:
Read and understand this document.
Verify the Kit Contents.
Alert Symbols and General Restrictions
When any of the following symbols appear, read the associated information carefully.
Symbol
Meaning
Description
Danger
The identified danger causes physical and property damage.
Warning
The identified danger could cause physical and property damage.
Caution
Caution
Use caution.
All examples and diagrams are intended to aid understanding, and do not guarantee
operation. Unitronics accepts no responsibility for actual use of this product based on
these examples.
Please dispose of this product according to local and national standards and regulations.
This product should be installed only by qualified personnel.
Failure to comply with appropriate safety guidelines can cause severe injury or
property damage.
Do not attempt to use this device with parameters that exceed permissible levels.
Do not connect/disconnect the device when power is on.
