Unitron Versamet 4, Manual, Page: 5 / 22

VERSAMET 4 INVERTED METALLURGICAL MICROSCOPE
UNITRON
73 Mall Drive, Commack, NY 11725 • 631-543-2000 • www.unitronusa.com
4
INTRODUCTION
Congratulations on the purchase of your new UNITRON
®
microscope. UNITRON
®
microscopes are
engineered and manufactured to the highest quality standards. Your microscope will last a lifetime if used
and maintained properly. UNITRON
®
microscopes are carefully assembled, inspected and tested by our
staff of trained technicians in our New York facility. Careful quality control procedures ensure each
microscope is of the highest quality prior to shipment.
UNPACKING AND COMPONENTS
Your microscope arrived packed in a molded shipping carton. Do not discard the carton: the carton
should be retained for reshipment of your microscope if needed. Avoid placing the microscope in dusty
surroundings or in high temperature or humid areas as mold and mildew will form. Carefully remove the
microscope from the EPE foam container by its arm and base and place the microscope on a flat,
vibration-free surface. Check the components against the following standard configuration list:

Stand, which includes the
supporting arm, trinocular
viewing head, and
focusing mechanism

Eyepieces as ordered

Roll-down eyeguards

Nosepiece

Nosepiece lock screw

Objectives as ordered

Mechanical stage

Stage plate inserts

Stage clips (pair)

Illuminator

Color Filter slider

Green, yellow and clear daylight blue

Polarizer slider

Analyzer slider

360° rotatable analyzer slider

DIC slider (optional)

3-prong electric power cord

Hex screwdriver

Hex screwdriver magnetic mount

Dust cover

Instruction manual
Optional accessories such as optional objectives and/or eyepieces, slides sets, etc., are not shipped as
part of the standard equipment. These items, if ordered, are shipped separately.