UNIVERSE (REF. 8600)
19
3.2.5
Output Settings
IP
Click on “Add Service” to add a service to an IP stream. You can keep adding services until the
CPU hits 100%. But if the CPU usage exceeds 90% you can have performance issues, due to
peaks in the services. If you want the Universe to decrypt the services, make sure the lock icon
is green otherwise go back to input settings and descramble the service.
Don’t forget to press the “Apply” button when all output settings are done.
SID: Service ID.
Type:
: HD-TV
: SD-TV
: Radio
: Data
Lock:
: Descrambled service.
: Scrambled service.
No lock: FTA service.
Name: Name of the service.
Dest. Address: Destination address, the IP address the service will run on, needs to be in
the 239.0.0.0-239.255.255.255 range.
Dest. Port: Destination port, the port the service will run on.
!
Make sure that no 2 service(s) have the same Destination address and Destination
port, in that case only 1 service will be available.
