UNIVERSE (REF. 8600)
14
3.2.3.
Input Settings
Choose the mode you want to use and if required the type of LNB. The following settings
depends on the Mode and LNB used. If you select the Universal or C-Band LNB the LO
Frequency and Band / Tone settings will not be shown because those settings are filled in
automatically.
LNB / Multiswitch
Choose this mode if you are using a regular LNB or a multiswitch.
LO Frequency (kHz): The LO Frequency used in the LNB. Set this to 0 when intermediate
frequencies (IF) are used for tuning. This setting will be filled in automatically when
choosing the Universal or C-Band LNB type.
(only available if LNB type is manual)
The LNB / Multiswitch is being controlled by another device: Enable this setting if you are
using another device to control the input e.g. another universe.
Polarisation / Voltage: The polarisation or voltage you want to use.
Band / Tone: The band / tone you want to use.
(only available if LNB type is manual)
Sat.: The satellite (A, B, C, D) used.
Apply: Save your current settings!
