CHAPTER 3: WELDING SYSTEM SET-UP
MODEL HF2 2 kHz HIGH FREQUENCY RESISTANCE WELDING POWER SUPPLY
3-20
990-057
16
Press [SAVE] to save your program. You are now back in the Weld Graph RUN State.
17
Make additional test welds and then re-program WELD time and weld CURRENT as necessary
to make a good weld. Try to use the minimum time and current necessary to make a good weld
so that the weld joint heat affected zone will be minimized.
18
Up to 128 different weld schedules can be created and saved. To manually recall any specific
weld schedule, press the up or down vertical arrow keys [ ] until the desired schedule
number appears on the display screen. A faster technique for recalling a specific schedule is to
input the Schedule number using the number keys.
19
To recall any weld schedule automatically, use the binary Remote Schedule Select Control
Lines as discussed under the step 4 of the
PLC to HF2 Weld Control Electrical Connections
section.
NON-FORCE FIRED, MULTIPLE AIR ACTUATED WELD HEAD SYSTEM
This system configuration is not released.
