Unitek Classic Q3x/x-240-840A Series, Manual

Page: 34 / 34

Warranty
33 Q3 240-840A
W
ar
ra
nt
y
8 Warranty
8.1 Warranty
UNITEK warranties that the device is free from material and production defects. Test results are
recorded and archived with the serial number.
The warranty time begins from the time the device is shipped, and lasts two years.
UNITEK undertakes no warranties for devices which have been modified for special applications.
During the warranty period, UNITEK will, at its option, either repair or replace products that prove
to be defective, this includes guaranteed functional attributes. UNITEK specifically disclaims the
implied warranties or merchantability and fitness for a particular purpose. For warranty service or
repair, this product must be returned to a service facility designated by UNITEK .
For products returned to UNITEK for warranty service, the buyer shall prepay shipping charges to
UNITEK and UNITEK shall pay shipping charges to return the product to the buyer.
However, the buyer shall pay all shipping charges, duties and taxes for products returned to
UNITEK from another country.
The foregoing warranty shall not apply to defects resulting from:
- Improper or inadequate repairs effected by the buyer or a third party
- Non-observance of the manual which is included in all consignments
- Non-observance of the electrical standards and regulations,
- Improper maintenance
- Acts of nature.
All further claims on transformation, diminution and replacement of any kind of damage,
especially damage, which does not affect the UNITEK device, cannot be considered. Follow-on
damage within the machine or system, which may arise due to malfunction or defect in the device
cannot be claimed. This limitation does not affect the product liability laws as applied in the place
of manufacture (i.e. Germany).
UNITEK reserves the right to change any information included this MANUAL.
All connection circuitry described is meant for general information purposes and is not
mandatory.
The local legal regulations and those of the standards authorities have to be adhered to. UNITEK
does not assume any liability, expressively or inherently, for the information contained in this
MANUAL, for the functioning of the device or its suitability for any specific application.
All rights are reserved.
Copying, modifying and translations lie outside UNITEK’s liability and thus are not prohibited.
UNITEK’s products are not authorized for use as critical components in the life support devices or
systems without express written approval.
The onus is on the reader to verify that the information here is current