1 Basic - Information
5
The user must ensure that in the event of:
- device failure
- incorrect operation
- loss of regulation or control
the axis will be safely de-activated.
It must also be ensured that the machine or equipment are fitted with device
independent monitoring and safety features.
Man as well as property must not be exposed to danger at any time.
Assembly
- should only be carried out when all voltages have been removed.
- should only be carried out by suitably trained personnel
Installation
- should only be carried out when all voltages have been removed.
- should only be carried out by suitably trained personnel
- should only be carried out in accordance with health and safety guidelines
Setting adjustments/programming
- should only be carried out by suitably trained personnel with knowledge in
electronic drives and their software
- should only be carried out in accordance with the programming advice
- should only be carried out in accordance with health and safety guidelines
CE
After having been mounted in machines and installations the operation of the
device must not be started until the machine or the installation has been approved
of the regulations of the EC machine guideline 89/392/EWG and the EMC guideline
89/336/EWG.
Under the installation and test conditions of chapter ‘EMC advice’ the device
adheres to the following: guideline EU 89/336/EWG, EMC standards EN61000-2 and
EN61000-4.
A manufacturer’s declaration can be asked for.
The manufacturer of the machine or the installation is responsible for the
observance of the threshold values prescribed in the EMC regulations.
QS
Test results are archived with the device serial number by the manufacturer for a
period of 5 years.
Test protocols can beasked for.
Safety symbols . . . . . . . . . . . . . Important
Caution - Danger to life
Attention
High voltage
Warning