4
BAMOBIL D3.2
Safety advice - Standards and guidelines
Electronic equipment is not fault proof. This fact should be borne in mind for all
possible operating conditions.
Before installation or commissioning begins, this manual must be thoroughly read
and understood by the technical staff involved.
If any uncertainty arises, the manufacturer or dealer should be contacted.Any
incorrect installation/connection may damage the device.
BAMOBIL devices are power electric parts used for regulating energy flow.
They are designed to control EC synchronous motors (brushless dc motors) for
industrial applications.
Protection rating IP40.
Connection
only
to batteries.
Standards and guidelines
The device and its associated components can only be installed and switched on
where the local regulations and technical standards have been strictly adhered to:
EU Guidelines
89/392/EWG, 84/528/EWG, 86/663/EWG, 72/23/EWG
EN60204, EN50178, EN60439-1, EN60146, EN61800-3
IEC/UL
EC364, IEC 664, UL508C, UL840
VDE Regulations
VDE100, VDE110, VDE160
T
Ü
V Regulations
Trade body guidelines
VGB4
Control and power connections can be live even though
the drive is inoperative.
The dc bus discharge time is superior to 4min.
Measure the voltage prior to any disassembly!
Caution: High voltage DC 900V=.
Electric shock hazard!
Danger to life!
DC-BUS discharge - time >4min