UNITED WR10, Owner'S Manual

Page: 10 / 20

© 201 6 Enviro Water Solutions, LLC
3060 Performance Circle, Suite 2, DeLand, FL 32724
Page 10
(855) 498-0023
Sediment Filter Assembly
Figure
7
Sediment Filter Installation
Figure
8
1.
Attach the Mounting Bracket to the wall using the supplied Phillips Head Screws
.
2.
Attach the
Sediment
Filter System to the Mounting Bracket using the supplied Bolt Head Screws
and washers .
3. Lightly t ighten the Sediment Filter Housing using the supplied Sediment Filter Wrench
( counter clockwise, do not over-tighten ).
4. Connect outgoing water supply from the Filter/Conditioner to the inlet of the Sediment Filter
system.
5. Connect the outgoing water supply to the home to the outlet side of the Sediment Filter system.
Notice:
The Sediment Filter Housing comes with a 1” threaded female inlet/outlet and will require additional
fittings to adapt to your plumbing. A shut-off valve is recommended prior to the
Sediment
Filter System.
Sediment Filter Cover Sediment Filter
O-Ring
Stand Pipe
Sediment Filter Housing
Top View
S
ediment Filter Housing
Inlet Water
Supply
Mounting
Bracket
United Water Filter WR 10/PS15
Premium Whole House Water Filter /Conditioner
Rev A
1. Unscrew the cover from the Sediment Filter Housing.
2. Remove the plastic covering from the Sediment Filter.
3. Place the Sediment Filter onto the Stand Pipe in the Sediment Filter Housing.
4. Lube the O - R ing with clean silicone grease before attaching the cover onto the housing.
5. Screw the cover onto the Sediment Filter Housing until hand-tight.