background image

10.

 

Place  the  fan  on  a  stable  level  and  dry  surface  when  operating  to 
avoid overturning. 

11.

 

Only connect to a suitably AC 220-240V~50Hz mains socket. 

12.

 

Do not operate the fan in the presence of explosive and/ or flammable 
fumes. Do not place the fan or any parts near an open flame, cooking 

or other heating appliance. 

13.

 

Do  not  operate  the  fan  with  a  damaged  cord  or  plug,  after  a 
malfunction or if it is dropped or damaged in any manner.     

14.

 

Do not operate the fan without the fan grilles properly in place. 

15.

 

Do not place the fan close to an open window. Rain splashing on the 
fan could cause an electric shock hazard. 

16.

 

Do not let the power cord hang over the edge of a table or counter or 
let it touch any hot surfaces. 

17.

 

Do  not  insert  or  allow  foreign  objects  to  enter  the  grille  openings  as 
this may cause damage to the appliance. 

18.

 

Do not use the fan if grille becomes damaged or loose. 

19.

 

This appliance is not intended for use by persons (including children) 
with  reduced  physical,  sensory  or  mental  capabilities,  or  lack  of 

experience and knowledge, unless they have been given supervision 

or instruction concerning use of the appliance by a person responsible 

for their safety. 

20.

 

Children should be supervised to ensure that they do not play with the 
appliance. 

21.

 

Switch the fan OFF and unplug it from the outlet when it is not in use, 
when moving fan from one location to another and before cleaning. 

22.

 

To disconnect, grip the plug and pull it from the wall outlet.    Never pull 
by the cord.

 

23.

 

Do not attempt to repair, disassemble or modify the appliance. There 

are no user-serviceable parts inside. Refer all servicing to qualified 

service personnel. 

Summary of Contents for USF-669








Reviews: