ASSEMBLY INSTRUCTIONS:
Stand fan
1. Unscrew the pole clamp (
14)
from the lower base pole (
15)
by turning
counter-clockwise and set aside. Pull out the adjustable pole (
13)
all the
way to the top. (You may have to push it up from the bottom to get it up)
2. Set the base on a level dry surface and remove the screws from the
base (
18),
then install the lower base pole (
15)
and match the 4 holes over
the 4 screw holes on the base and replace the 4pcs of screws back onto
the base.
3. Place the base (
18)
on through the column with the tabs/slots pointed
downward.
4. Replace the pole clamp (
14)
and tighten by turning clockwise.
5. Place the fan motor into the top of the inner pipe, tighten the
Set Screw
.
6. Unscrew the rear guard central fixing nut (
4)
on the front of the motor by
turning counterclockwise.
7. Mount the rear guard (
5)
to the motor front cover by matching 3 holes on
the guard to the 3 round positioning knobs on the motor front cover. Push
