Weekly date and time settings
Stage
times of press
“SETTING”
The heater Condition
Display
Press “+”
Press
“
-
”
Time calibration
setting
First
Adjust the date to
the current date
The date light flickers
Date forward
Date backward
Second
Adjust the time to
the current time
The time light flickers
every pressing
increases one
hour & repeats
this cycle
every pressing
increases one
minute & repeats
this cycle
Weekly timing
setting
Third
Set start date
The date light flickers
Date forward
Date backward
Fourth
Set start time
The time light
flickers
, “ON”
lights
every pressing
increases one
hour & repeats
this cycle
every pressing
increases one
minute & repeats
this cycle
Fifth
Set stopping time
The time light
flickers
, “OFF”
lights
every pressing
increases one
hour & repeats
this cycle
every pressing
increases one
minute & repeats
this cycle
If you need to set timing for another day, you can repeat steps
“third”
(can press “+”and “
-
”to
set date),
“fourth”, “Fifth”.
Complete
setting
Hold this
pressed for 2
seconds
1.The heater exits weekly timing setting condition, and timer starts.
2.Display shows the current time, and cl
ock “
”
lights up.
Note: When the heater is operating in weekly setting time, if the heater meets open window function, two
tubes on the heater will go out and the other two tubes will keep lighting up. You can press any button to
make the heater resume operation in weekly setting time condition.
