UNITED UHQ-887, Instruction Manual

Page: 7 / 11

1. Time calibration setting
In power saving mode, the power saving indication “ ” light s up.
(1-1) Press the button “SETTING” to set the time to the current time. Press “+” or “ - ” to adjust current
date from Monday to Sunday. (If today is Monday, you can set date to “Mon” and the indicator lights up.)
Then press “SETTING” again, the date is confirmed and you can enter the time setting condition.
(1-2) You can set hour by pressing “+” (24 hours a day, every adjustment increases one hour and repeats
this cycle), and set minute by pressing “ - ” (60 minutes an hour, every adjustment increases one minute and
repeats this cycle). If current time is 12:00, you need to adjust time to 12:00.
2. Weekly timer setting
(2-1) After time calibration, press “SETTING” again to set the start date of weekly timing, you can
press “+” and “ - ” to set start date from Monday to Sunday, then press “SETTING” again to confirm the start
date that you set. “ON” wil l be shown on display, then you can set the start time.
(2-2) When “ON” is displayed, you can set the hour by pressing “+” (24 hours a day, every
adjustment increases one hour and repeats this cycle ), and set minute by pressing “ - ” (60 minutes an hour,
every adjustment increases one minute and repeats thi s cycle), then press “SETTING” again to confirm the
start time that you have set. “OFF” will be show n on display, then you can set stopping time.
(2-3) When “OFF” is displayed, you can set hour by p ressing “+” (24 hours a day, every
adjustment increases one hour and repeats this cycle ), and set minute by pressing “ - ” (60 minutes an hour,
every adjustment increases one minute and repeats this cycle), then pr ess “SETTING” again to confirm the
stopping time that you have set. The heater re-enters timing setting condition to set the next timing.
(2-4) If you need another timing for another day, you can repeat steps (2-1) ( press “+” and “ - ”to
set date), (2-2), (2-3), (2-4).
(2-5) When you have completed setting, press and hold the “setting” for 2 seconds, the heater
will exit weekly setting condition, and timer starts. The display shows current time, and clock “ ” lights
up.
(3) When time shown on display reaches start time that you have set before, the heater will start
operation at the set temperature. When time shown on display reaches stopping time that you have set
before, the heater will stop operation.