19.
Do not use this heater with a programmer, timer or any other device that switches the heater
on automatically, since a fire risk exists if the heater is covered or positioned incorrectly.
20.
Do not use this heater in the immediate surroundings of a bath, a shower or a swimming
pool.
21.
WARNING: In order to avoid overheating, do not cover the heater.
22.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
23.
The appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
24.
Children should be supervised to ensure that they do not play with the appliance.
SAFEGUARD AND MAINTAIN
1.
Please pull out the plug and cool it to the normal temperature before safeguarding and
maintaining.
2.
It’s easy to accumulate of dust on the appearance, should clean it frequently with soft cloth.
Must pull down the screws and nut, take off the net cover before cleaning the inner surface of
the radiation cover. Avoid using a wet or flammable soft cloth to clean the heat device, also
avoid hanging soft cloth or other flammable things on it. It must set up the net cover and fix
the screws after cleaning.
3.
When the surface is too dirty, could be polished with water lower than 50℃ and mixed with
neutral detergent, then dry it.
4.
When do cleaning, avoid using the petrol, diluent, sour things or any other chemical things
and the materials which may damage the heaters’ surface easily.
5.
Should cool it to the normal temperature, dry it, and pack it carefully, then deposit to a dry
and ventilative place.
OBSTACLE ELIMINATE
1.
If the heater don’t heat up after starting the machine, please check whether the power is
normal, whether the socket is good, retry it after checking carefully.
2.
Please send it to the service department for other obstacles.
3.
There is safety switch at the bottom of the heater, and when it fall down, the switch would
cut off the electricity automatically, and it stop working, make it perpendicularity and turn on
the machine, it would be working normally.
