Page | 24
5.0 Maintenance
5.1 Maintenance in CPC Interface
By pressing MAINTENANCE on the
Main Menu,
the operator will be able to view and set basic
maintenance functions for the CPC. These functions include:
•
Total Operational Hours
•
Required Maintenance Alarm
•
Maximum System RPM
•
Maximum Cycle Time
•
PLC Input / Output Utilization
•
Serial Number / Model Number
•
Reset Password
•
Program Version
System critical functions including maximum cycle time, RPM, and maintenance alarm reset can be
password protected to keep out unauthorized personnel. Once the maintenance alarm has timed out
a message will be flash for one (1) minute on the CPC interface and repeat every fifteen (15) minutes
until the reset key activated.
5.1.1 System Information
System Maintenance
Figure 5.1
Summary of Contents for CPC 12000
Page 1: ...CPC 12000 Operation and Service Manual ...
Page 33: ...Page 33 5 8 Adjusting Idler Assembly ...
Page 39: ...Page 39 ...