Page
26
of
54
registered to the same base/dongle and participating in the first call, it will follow with the primary
headset to the second incoming call. User can swap the two calls (from primary headset) by long pressing
the Multi -Function Button, which will be followed by the voice promp
t “Call swapped”
.
Long pressing the Multi-Function Button will end the first call and accept the second. That will be
followed by the announcement “Call retrieved”.
User can reject the secondary call by double pressing the Multi-Function button.
NOTE:
In case of two calls established via BT and USB-DECT link refer to Chapter 16 Appendix D.
8.1.3
Microsoft Teams integration
The Multi-Function button has integrated functionalities to respond to Microsoft Teams upon long pressing
it at Idle state.
Depending on the scenario long pressing the MS Teams button will trigger activating different actions in
Teams:
•
When there is
no notification
from Teams present long pressing the multi-function button will
bring
MS Teams to the foreground
.
•
If there is
a missed call notification
, long pressing the multi-function button will
open MS Teams
missed calls list
•
In case of
voicemail notification
, the button will
open the MS Teams voicemail list
•
If there is a
meeting alert
present, it will
open the MS Teams meeting.
Additionally, the LED on the microphone also reacts with a purple blink upon notifications, missed call,
voicemail, or meeting alert in MS Teams.
If the headset comes out of range during a MS Teams meeting, the base will put the call on hold
automatically. It will also automatically resume the call when the headset is available again.
8.1.4
Terminating call
To end an active call from the headset, the user has to simply press the multi-function button or place the
headset in cradle onto the Clave Base station.
